CMEMS
 
  1. 2021
  2. 2020
  3. 2019

Publications in peer review Journals

At the end of the citation, IF means the impact factor of the journal, which was obtained in the ISI Web of Knowledge.

2021

  1. Ihsan Çaha, Alexandra C. Alves, Caterina Chirico, Ana M:P: Pinto, Sofia Tsipas, Elena Gordo, "A promising method to develop TiO2-based nanotubular surfaces on Ti-40Nb alloy with enhanced adhesion and improved tribocorrosion resistance". Applied Surface Science 542 (2021) 148658, 2021. IF=6.182.
  2. V.C.Pinto, P.J. Sousa, E.M.F. Vieira, L.M. Gonçalves, G. Minas, "Antibiofouling strategy for optical sensors by chlorine generation using lowcost, transparent and highly efficient electrodes based on platinum nanoparticles coated oxide". Chemical Engineering Journal, Volume 404, 15 January 2021, 126479 , 2021. IF=10.652.
  3. Costa, D., Vieira, P., Pinto, C., Lima, C., Rolanda, C., et al., "Clinical performance of a new software to automatically detect Angioectasias in Small Bowel Capsule Endoscopy". GE Portuguese Journal of Gastroenterology, 2021. IF=0.855.
  4. Silva M., Freitas B., Andrade R., Carvalho Ó., Renjewski D., Flores P., et al., "Current Perspectives on the Biomechanical Modelling of the Human Lower Limb: A Systematic Review". Archives of Computational Methods in Engineering, 1-36., 2021. IF=7.257.
  5. Pereira, R.S.F., Moura, C.G., Henriques, B., Chevalier, J., Silva, F.S., Fredel, M.C., "Effect of dip-coating process on mechanical behavior of 3Y-TZP using different aging-free coatings". Ceramics International, 2021. IF=4.126.
  6. P.F. Gouveia, J. Mesquita-Guimarães, M. E. Galarraga-Vinueza, J.C.M. Souza, F. Silva, M. Fredel; et al., "In-vitro mechanical and biological evaluation of novel zirconia reinforced bioglass scaffolds for bone repair". Journal of the Mechanical Behavior of Biomedical Materials. In press. 104164, 2021. IF=3.737.
  7. José A. Rodrigues, Sara Pimenta, José P. Pereira, Nuno M. Gomes, Márcio R. Souto, José H. Correia, "Low-cost silicon neural probe: fabrication, electrochemical characterization and in vivo validation". Journal Microsystem Technologies, 30 May 2020, 2021. IF=2.014.
  8. P.Barreiros, J. Braga, R. Faria-Almeida, C. Coelho, W. Teughels, J.C.M. Souza, "Remnant oral biofilm and microorganisms after autoclaving sterilization of retrieved healing abutments". Journal of Periodontal Research. In press, 2021. IF=3.12.
  9. Marques A., Miranda G., Silva F., Pinto P., Carvalho Ó., "Review on current limits and potentialities of technologies for biomedical ceramic scaffolds production". Journal of Biomedical Materials Research Part B: Applied Biomaterials., 2021. IF=2.831.
  10. A.I Costa, S. Gemini-Piperni, A.C. Costa, N.A. Costa, N.R. Checca, A.M.P. Pinto, "TiO2 bioactive implant surfaces doped with specific amount of Sr modulate mineralization". Materials Science & Engineering C (in press), 2021. IF=6.259.
  11. F.Bartolomeu, Costa, M.M., Alves, N., Miranda, G., Silva, F.S., "Selective Laser Melting of Ti6Al4V sub-millimetric cellular structures: Prediction of dimensional deviations and mechanical performance". Journal of the Mechanical Behavior of Biomedical Materials Volume 113, January 2021, Article number 104123, 2021.
  12. T Lage, R O Rodrigues, SO Catarino, J Gallo, M Brañobre-López, G Minas, "Graphene-Based Magnetic Nanoparticles for Theranostics: An Overview for Their Potential in Clinical Application". Nanomaterials, 2021, volume 11, 1073 , 2021. IF=4.324.
  13. P J Sousa, V C Pinto, V H Magalhães, R O Rodrigues, P C Sousa, G Minas, "Development of Highly Sensitive Temperature Microsensors for Localized Measurements". Applied Sciences, 2021, 11(9), 3864, 2021. IF=2.474.
  14. V Carvalho, I Gonçalves, T Lage, R O Rodrigues, G Minas, et al., "3D Printing Techniques and Their Applications to Organ-on-a-Chip Platforms: A Systematic Review". Sensors, 2021, 21(9), 3304, 2021. IF=3.275.
  15. J Lee, S Mehrotra, H Z-Eelanjegh, R O Rodrigues, A Akbarinejad, et al., "Organ-on-a-Chip: A Heart-Breast Cancer-on-a-Chip Platform for Disease Modeling and Monitoring of Cardiotoxicity Induced by Cancer Chemotherapy (Small 15/2021)". Small, Back cover, vol 17, nº 15, April 15, 2021, 2021. IF=11.459.
  16. Ruben E. Figueiredo, Vitor Monteiro, Joao C. Ferreira, Joao L. Afonso, Jose A. Afonso, "Smart home power management system for electric vehicle battery charger and electrical appliance control". International Transactions on Electrical Energy Systems, Vol. 31, No. 4, April 2021, 2021. IF=1.692.
  17. Vitor Monteiro, Jose A. Afonso, Joao C. Ferreira, Tiago Sousa, Joao L. Afonso, "The Role of the Electric Vehicle in Smart Homes: Assessment and Future Perspectives". EAI Endorsed Transactions on Energy Web, January 2021, 2021.
  18. S. Pimenta, J. A. Rodrigues, F. Machado, J. F. Ribeiro, M. J. Maciel, J. H. Correia, "Double-Layer Flexible Neural Probe With Closely Spaced Electrodes for High-Density in vivo Brain Recordings". Frontiers in Neuroscience, Vol. 15, Article 663174, 2021. IF=3.707.
  19. M. J. Maciel, M. F. Silva, S. Pimenta, J. H. Correia, "Detection of low-magnetic fields by rubidium (87Rb) vapor cell". Journal of Physics: Conference Series 1837 1 (2021): 012002, 2021. IF=0.599.
  20. B. Esteves, S. Pimenta, E.M.F. Vieira, J. R. Freitas, J. A. Rodrigues, J. H. Correia, "SnOx and a-Si thin-films based photodiode in a flexible substrate for visible spectral region". Materials Letters 286 (2021): 129251, 2021. IF=3.204.
  21. J. R. Freitas, S. Pimenta, J. F. Ribeiro, T. Dong, Z. Yang, J. H. Correia, "Simulation, fabrication and morphological characterization of a PDMS microlens for light collimation on optrodes". Optik 227 (2021): 166098, 2021. IF=2.187.
  22. H. R. Gonçalves, A. Rodrigues, C. P. Santos, "Vibrotactile Biofeedback Devices in Parkinson’s Disease: a narrative review". Medical & Biological Engineering & Computing Journal, 2021. IF=2.022.
  23. Luís Moreira, Joana Figueiredo, Pedro Fonseca, João P. Vilas-Boas, Cristina P. Santos, "Lower limb kinematic, kinetic, and EMG data from young healthy humans during walking at controlled speeds". Scientific Data , 2021. IF=5.541.
  24. I.Çaha, A.C. Alves, L.A. Rocha, A.M.P. Pinto, P.N. Lisboa-Filho, F. Toptan, "Degradation behaviour of Ti-12Nb alloy coated with ZnO/TiN double layer". Surface & Coatings Technology 413 (2021), 2021. IF=4.158.
  25. I.Çaha, A.C. Alves, C. Cirico, A.M.P. Pinto, E. Gordo, F. Toptan, "Improved tribocorrosion behavior on bio-functionalized β-type titanium alloy by the pillar effect given by TiN reinforcements". Surface & Coatings Technology 413 (2021), 2021. IF=4.158.
  26. N.A. Costa, A.L. Rossi, A.C. Alves, A.M.P. Pinto, F. Toptan, L.A. Rocha, "Growth Mechanisms and Tribocorrosion Behavior of Bio-Functionalized ZrO2 Nanoparticles-Containing MAO Coatings Formed on Ti-40Nb Alloy". J Bio Tribo Corros 7, 53 , 2021. IF=2.488.
  27. Cátia Marinho, Fatih Toptan, Aníbal Guedes, Alexandra C. Alves, "Electrochemical response of Ti joints vacuum brazed with TiCuNi, AgCu, and Ag fillers". Trans. Nonferrous Met. Soc. China, 2021. IF=2.917.
  28. Luís Sousa, L. Basílio, Alexandra C. Alves, Fatih Toptan, "Tribocorrosion-resistant biofunctionalized Ti-Al2O3 composites". Surface & Coatings Technology , 2021. IF=4.158.
  29. E.M.F. Vieira, J.P.B.Silva, Katerina Veltruská, Luis Marques, Oliver Fenwick, L.M. Gonçalves, "All-oxide p-n junction thermoelectric generator base on SnOx and ZnO thin films". ACS Applied Materials and Interfaces, 2021. IF=9.229.
  30. J.P.B.Silva, E.M.F.Vieira, Katarzyna Gwozdz, L.M.Goncalves, Judith L. MacManus-Driscoll, Mario Pereira, "High-performance self-powered photodetectors achieved through the pyro-phototronic effect in Si/SnOx/ZnO heterojunctions". Nano Energy, 2021. IF=17.881.
  31. N. Chlibi, j.P.B.Silva, E.M.F.Vieira, L.M.Goncalves, M.J.M.Gomes, L.El Mir, "Touch sensor and photovoltaic characteristics of CuSbS2 thin films". Ceramics International, 2021. IF=4.527.
  32. R. Brito-Pereira, A. S. Macedo, C. R. Tubio, S. Lanceros-Méndez, V. F. Cardoso, "Fluorinated polymer membranes as advanced substrates for portable analytical systems and their proof of concept for colorimetric bioassays". ACS Applied Materials and Interfaces, 2021. IF=8.758.
  33. R. Gonçalves, D. Miranda, T. Marques-Almeida, M. M. Silva, V. F. Cardoso, et al., "Patterned separator membranes with pillar surface microstructures for improved battery performance". Journal of Colloid And Interface Science, 2021. IF=7.489.

2020

  1. J.C.M. Souza, K.Apaza-Bedoya, C.A.M. Benfatti, F. Silva, B. Henriques, "A Comprehensive Review on the Corrosion Pathways of Titanium Dental Implants and Their Biological Adverse Effects". Metals, Vol. 10, art. no. 1272, pp. 1-14., 2020. IF=2.347.
  2. C. Teixeira, A. F. Silva, L. A. Rocha, "A Computational Fluid Dynamics based Sensitivity Analysis of the Chemical Vapor Analysis process to synthesize Carbon Nanotubes". Journal of Thermal Science and Engineering Applications, vol. 12, no. 1, 2020. IF=1.692.
  3. J. Lee, S. Mehrotra, E. Zare‐Eelanjegh, R. O. Rodrigues, A. Akbarinejad, et al., "A Heart-Breast Cancer-on-a-Chip Platform for Disease Modeling and Monitoring of Cardiotoxicity Induced by Cancer Chemotherapy". Small 2020, 2004258, 2020. IF=11.321.
  4. Rui Carvalho, Tao Dong, Zhaochu Yang, Haakon Karlsen, LM Goncalves, et al., "A Low-Power CMOS Current Reference for Piezoelectric Energy Harvesters". IEEE TRANSACTIONS ON ELECTRON DEVICES, VOL. 67, NO. 8, AUGUST 2020, 2020. IF=3.245.
  5. Leal, A., Andrade, R., Hinckel, B.B., Tompkins, M., Flores, P., Silva, F., "A new device for patellofemoral instrumented stress-testing provides good reliability and validity". Knee Surgery, Sports Traumatology, Arthroscopy, Vol. 28, pp. 389-397, 2020. IF=3.518.
  6. Guimarães, B., Fernandes, C.M., Figueiredo, D., Cerqueira, M.F., Carvalho, O., Silva, F.S., "A novel approach to reduce in-service temperature in WC-Co cutting tools". Ceramics International, Vol. 46, pp. 3002-3008, 2020. IF=4.126.
  7. I. Çaha, A. C. Alves, L. A. Rocha, F. Toptan, "A Review on Bio‐functionalization of β‐Ti Alloys". Journal of Bio- and Tribo-Corrosion, Vol. 6:135, 2020. IF=2.488.
  8. F. Bartolomeu, N. Dourado, F. Pereira, N. Alves, G. Miranda, F.S. Silva, "Additive manufactured porous biomaterials targeting orthopedic implants: A suitable combination of mechanical, physical and topological properties". Materials Science & Engineering C, Vol. 107:110342, 2020. IF=6.259.
  9. Bartolomeu, F., Costa, M.M., Alves, N., Miranda, G., Silva, F.S., "Additive manufacturing of NiTi-Ti6Al4V multi-material cellular structures targeting orthopedic implants". Optics and Lasers in Engineering, Vol. 134, art. no. 106208, 2020. IF=4.962.
  10. M. Escobar, B. Henriques, M. Fredel, F. Silva, M. Ozcan, J.C.M. Souza, "Adhesion of PEEK to resin-matrix composites used in dentistry: a short review on surface modification and bond strength". Journal of Adhesion Science and Technology 34(11):1241-1252, 2020. IF=1.484.
  11. Madeira, S., Barbosa, A., Moura, C.G., Buciumeanu, M., Silva, F.S., Carvalho, O., "Aunps and Agμps-functionalized zirconia surfaces by hybrid laser technology for dental implants". Ceramics International, Vol. 46, pp. 7109-7121, 2020. IF=4.126.
  12. Vieira, P.M., Freitas, N.R., Valente, J., Vaz, I.F., Rolanda, C., Lima, C.S., "Automatic detection of small bowel tumors in wireless capsule endoscopy images using ensemble learning". Medical Physics, 47(1), pp. 52–63, 2020. IF=3.492.
  13. M.B. Cruz, J.F. Marques, G. Peñarrieta-Juanito, M. Costa, J.C.M. Souza, et al., "Bioactive-enhanced PEEK dental implant materials: mechanical characterization and cellular responses". Journal of Oral Implantology 2020. July 14, 2020. IF=1.348.
  14. M. Pinho, M. C. Manso, R. Faria-Almeida, C. Martin, O. Carvalho, B. Henriques, "Bond Strength of Metallic or Ceramic Orthodontic Brackets to Enamel, Acrylic, or Porcelain Surfaces". Materials, Vol. 13, pp. 1-16., 2020. IF=3.26.
  15. Mesquita-Guimarães, J., Detsch, R., Souza, A.C., Henriques, B., Silva, F.S., Boccaccini, A.R, "Cell adhesion evaluation of laser-sintered HAp and 45S5 bioactive glass coatings on micro-textured zirconia surfaces using MC3T3-E1 osteoblast-like cells". Materials Science and Engineering C, Vol. 109, art. no. 110492, 2020. IF=6.259.
  16. S.O. Catarino, V.H. Pereira, N. Sousa, G. Minas, "Challenges and perspectives on biosensors for highly sensitive quantification of salivary troponins: a review". IEEE Sensors, 2020, 2020. IF=3.884.
  17. N. Pacheco, F.P. Brito, R. Vieira, Jorge Martins, H. Barbosa, L.M. Gonçalves, "Compact automotive thermoelectric generator with embedded heat pipes for thermal control". Energy Volume 197, 15 April 2020, 117154 , 2020. IF=6.947.
  18. Peixinho, N., Carvalho, O., Areias, C., Pinto, P., Silva, F., "Compressive properties and energy absorption of metal-polymer hybrid cellular structures". Materials Science and Engineering A, 794, art. no. 139921, 2020. IF=5.156.
  19. Silva, M., Freitas, B., Andrade, R., Espregueira-Mendes, J., Silva, F., et al., "Computational Modelling of the Bioheat Transfer Process in Human Skin Subjected to Direct Heating and/or Cooling Sources: A Systematic Review". Annals of Biomedical Engineering, Vol. 48, pp. 1616-1639, 2020. IF=3.696.
  20. Carvalho, O., Buciumeanu, M., Miranda, G., Madeira, S., Silva, F.S., "Corrigendum to “Development of a method to produce FGMs by controlling the reinforcement distribution”". Materials and Design, Vol. 92 (2016), pp 233–239, 2020. IF=6.821.
  21. Ihsan Çaha, Alexandra C. Alves, Caterina Chirico, Ana M:P: Pinto, Sofia Tsipas, Elena Gordo, "Corrosion and Tribocorrosion Behavior of Ti-40Nb and Ti-25Nb-5Fe Alloys Processed by Powder Metallurgy". METALLURGICAL AND MATERIALS TRANS. A, 51A, 3256–3267, 2020, 2020. IF=2.191.
  22. F. Toptan, "Corrosion and wear behaviour of highly porous Ti−TiB−TiNx in-situ composites in simulated physiological solution". Turkish Journal of Chemistry, Vol. 44, pp. 805-816, 2020. IF=1.037.
  23. Rodrigues, S.A., Alves, A.C., Silva, F.S., Barão, V.A.R., Mesquita, M.F., et al., "Corrosion Behavior of Titanium Frameworks under Laser and Tungsten Inert Gas Weldings: Applications in Dentistry". Surface Engineering and Applied Electrochemistry, Vol. 56, pp. 358-364, 2020. IF=0.759.
  24. Joana Figueiredo, Simão P. Carvalho, Diogo Gonçalves, Juan C. Moreno, Cristina P. Santos, "Daily Locomotion Recognition and Prediction: A Kinematic Data-Based Machine Learning Approach". IEEE Access, Vol. 8, pp. 33250-33262, 2020. IF=4.983.
  25. Ihsan Çaha, Alexandra C. Alves, P.A.B. Kuroda, C.R. Grandini, Ana M:P: Pinto, L.A. Rocha, "Degradation behavior of Ti-Nb alloys: Corrosion behavior through 21 days of immersion and tribocorrosion behavior against alumina". Corrosion Science 167 (2020) 108488, 2020. IF=6.884.
  26. P. Anacleto, H. Dinis, J. Fernandes, P. M. Mendes, "Design and Characterization of 3-D Self-Folded Microantennas for Implantable Microdevices". IEEE Transactions on Antennas and Propagation, 2020, 68(3), pp. 2031–2039, 8884634, 2020. IF=5.621.
  27. Jose A. Salgado, Vítor Monteiro, J. G. Pinto, João L. Afonso, José A. Afonso, "Design and Experimental Validation of a Compact Low-Cost Weather Station for Solar Photovoltaic Applications". EAI Endorsed Transactions on Energy Web, 2020. IF=n/a.
  28. Dantas, T.A., Pinto, P., Vaz, P.C.S., Silva, F.S., "Design and optimization of zirconia functional surfaces for dental implants applications". Ceramics International, Vol. 46, pp. 16328-16336., 2020. IF=4.126.
  29. Tiago Matos, C.L. Faria, Marcos Silva Martins, Renato Henriques, P.A. Gomes, L.M. Gonçalves, "Design of a multipoint cost-effective optical instrument for continuous in-situ monitoring of turbidity and sediment". Sensors 2020, 20, 3194, 2020. IF=4.019.
  30. Luiz A. Lisboa Cardoso, Vítor Monteiro, José Gabriel Pinto, Miguel Nogueira, José A. Afonso, João L. Afonso, "Design of an Intrinsically Safe Series-Series Compensation WPT System for Automotive LiDAR". Electronics, Vol. 9, No. 1, 2020. IF=2.845.
  31. Ruben E. Figueiredo, Aníbal A. Alves, Vítor Monteiro, J. G. Pinto, João L. Afonso, José A. Afonso, "Development and Evaluation of Smart Home IoT Systems applied to HVAC Monitoring and Control". EAI Endorsed Transactions on Energy Web, 2020. IF=0.598.
  32. M. G. Ferreira , D.R. Dias , L. Cardoso , M. Santos , C.A. Sousa , N. Dourado , "Dorsal Hump Reduction Based on the New Ethmoidal Point Classification: A Clinical and Radiological Study of the Keystone Area in 138 Patients". Aesthetic Surgery Journal (In Press), 2020. IF=3.034.
  33. A.C. Alves, A.I Costa, F. Toptan, J.L. Alves, I. Leonor, E. Ribeiro, "Effect of bio-functional MAO layers on the electrochemical behaviour of highly porous Ti". Surface & Coatings Technology 386 (2020) 125487, 2020. IF=3.996.
  34. Maziero Volpato, C.A., Carvalho, O., Özcan, M., Fredel, M.C., Silva, F.S., "Effect of laser irradiation on the adhesion of resin-based materials to zirconia: a systematic review and meta-analysis". Journal of Adhesion Science and Technology, 2020. IF=1.484.
  35. Guimarães, B., Fernandes, C.M., Figueiredo, D., Carvalho, O., Silva, F.S., Miranda, G., "Effect of laser surface texturing on the wettability of WC-Co cutting tools". International Journal of Advanced Manufacturing Technology, Vol. 111, pp. 1991-1999., 2020. IF=3.179.
  36. FP Brito, N Pacheco, R Vieira, Jorge Martins, LM Goncalves, et. al., "Efficiency improvement of vehicles using temperature controlled exhaust thermoelectric generators". Energy Conversion and Management, Volume 203, 1 January 2020, 112255, 2020. IF=9.334.
  37. Bartolomeu, F., Costa, M.M., Alves, N., Miranda, G., Silva, F.S., "Engineering the elastic modulus of NiTi cellular structures fabricated by selective laser melting". Journal of the Mechanical Behavior of Biomedical Materials, Vol. 110, art. no. 103891, 2020. IF=3.737.
  38. C Calçada, M Silva, V Baptista, V Thathy, R Silva-Pedrosa, et al., "Expansion of a specific Plasmodium falciparum PfMDR1 haplotype in Southeast Asia with increased substrate transport". mBIO, American Society for Microbiology, 33262257, 1 December 2020, 2020. IF=6.63.
  39. F Rodrigues , J F Ribeiro, P A Anacleto, A Fouchard, O David, P M Sarro, P M Mendes, "Fabrication and characterization of polyimide-based smooth titanium nitride microelectrode arrays for neural stimulation and recording". Journal of Neural Engineering, 2020, 17(1), 016010, 2020. IF=4.857.
  40. da Cruz, M.B., Marques, J.F., Fernandes, B.F., Costa, M., Miranda, G., et al., "Gingival fibroblasts behavior on bioactive zirconia and titanium dental implant surfaces produced by a functionally graded technique". Journal of Applied Oral Science, Vol. 28, art. no. e20200100, pp. 1-10, 2020. IF=2.005.
  41. Pereira, R.S.F., Moura, C.G., Henriques, B., Chevalier, J., Silva, F.S., Fredel, M.C., "Improvement of 3Y-TZP aging behavior by means of zirconia-based protective layers". Journal of the European Ceramic Society, Vol. 40, pp. 4315-4322., 2020. IF=4.799.
  42. Dantas, T.A., Carneiro Neto, J.P., Alves, J.L., Vaz, P.C.S., Silva, F.S., "In silico evaluation of the stress fields on the cortical bone surrounding dental implants: Comparing root-analogue and screwed implants". Journal of the Mechanical Behavior of Biomedical Materials, Vol. 104, art. no. 103667, 2020. IF=3.737.
  43. Pereira, R.S.F., Moura, C.G., Henriques, B., Chevalier, J., Silva, F.S., Fredel, M.C., "Influence of laser texturing on surface features, mechanical properties and low-temperature degradation behavior of 3Y-TZP". Ceramics International, Vol. 46, pp. 3502-3512., 2020. IF=4.126.
  44. Ferreira, R., Carvalho, Ó., Sobral, L., Carvalho, S., Silva, F., "Influence of morphology and microstructure on the tribological behavior of arc deposited CrN coatings for the automotive industry". Surface and Coatings Technology, Vol. 397, art. no. 126047, 2020. IF=3.996.
  45. B. Henriques, N. Hammes, J.C.M. Souza, M. Oscan, J. Mesquita-Guimarães, F. Silva, "Influence of ns-Nd:YAG laser surface treatment on the tensile bond strength of zirconia to resin-matrix cements". Ceramics International 47(17):27822-27831, 2020. IF=4.126.
  46. S. D. Tohidia, A. M. Rocha, N. Dourado, M. Rezazadeh, N. T. Quyền, A. Zille, "Influence of transcrystalline layer on finite element mesoscale modeling of polyamide 6 based single polymer laminate composites". Composite Structures, Vol. 232: 111555, 2020. IF=5.88.
  47. I. Çaha, A.C. Alves, C. Chirico, S.A. Tsipas, I.R. Rodrigues, et. al., "Interactions between wear and corrosion on cast and sintered Ti-12Nb alloy in comparison with the commercial Ti-6Al-4V alloy". Corrosion Science, Vol. 176:108925, 2020. IF=6.884.
  48. Fernandes, B.F., da Cruz, M.B., Marques, J.F., Madeira, S., Carvalho, Ó., Silva, F.S., "Laser Nd:YAG patterning enhance human osteoblast behavior on zirconia implants". Lasers in Medical Science, Vol. 35, pp. 2039-2048., 2020. IF=2.574.
  49. Moura, C.G., Carvalho, O., Magalhães, V.H., Pereira, R.S.F., Cerqueira, M.F., Gonçalves, L.M.V., "Laser printing of micro-electronic communication systems for smart implants applications". Optics and Laser Technology, Vol. 128, art. no. 106211, 2020. IF=3.621.
  50. Moura, C.G., Faria, D., Carvalho, O., Pereira, R.S.F., Cerqueira, M.F., Nascimento, R.M., "Laser printing of silver-based micro-wires in ZrO2 substrate for smart implant applications". Optics and Laser Technology, Vol. 131, art. no. 106416, 2020. IF=3.621.
  51. Faria, D., Henriques, B., Souza, A.C., Silva, F.S., Carvalho, O, "Laser-assisted production of HAp-coated zirconia structured surfaces for biomedical applications". Journal of the Mechanical Behavior of Biomedical Materials, Vol. 112, art. no. 104049, 2020. IF=3.737.
  52. M. F. Silva, S. Pimenta, J. A. Rodrigues, J. R. Freitas, M. Ghaderi, J. H. Correia, "Magnesium fluoride as low-refractive index material for near-ultraviolet filters applied to optical sensors". Vacuum, Vol. 181, November 2020, 109673, 2020. IF=3.119.
  53. C. Goncalves, A.F. Silva, J. Gomes, J.R. Simoes, "Mathematical Model of the Upper Limb Manual Lymph Drainage Massage". International Journal of Biomedical Science and Engineering, vol. 8, no. 4, pp. 58–63, 2020, 2020. IF=0.723.
  54. Miranda, G., Guimarães, B., Pereira, D., Buciumeanu, M., Cabral, A., et al., "Mechanical and tribological performance of Ni–Co-based binders for cubic boron nitride cutting tools". Journal of Composite Materials, Vol. 54, pp. 2753-2760, 2020. IF=2.28.
  55. Askari, E., Cengiz, I.F., Alves, J.L., Henriques, B., Flores, P., et al., "Micro-CT based finite element modelling and experimental characterization of the compressive mechanical properties of 3-D zirconia scaffolds for bone tissue engineering". Journal of the Mechanical Behavior of Biomedical Materials, Vol. 102, art. no. 103516,, 2020. IF=3.737.
  56. Madeira, S., Barbosa, A., Silva, F.S., Carvalho, O., "Micro-grooved surface laser texturing of zirconia: Surface characterization and artificial soft tissue adhesion evaluation". Ceramics International, Vol. 46, pp. 26136-26146., 2020. IF=4.126.
  57. C. Silva, B. Henriques, A. P. Novaes Oliveira, F. Silva, J. Gomes, J.C.M. Souza, "Micro-scale abrasion and sliding wear of zirconium-lithium silicate glass-ceramic and polymer-infiltrated ceramic network used in dentistry". Wear, Vol. 448–449 art. no. 203214, 2020. IF=4.595.
  58. Aida B. Moreira, Ricardo O. Sousa, Pedro Lacerda, Laura M. M. Ribeiro, Ana M. P. Pinto, Manuel F. Vieira, "Microstructural Characterization of TiC–White Cast‐Iron Composites Fabricated by In Situ Technique". Materials 2020, 13, 209, 2020. IF=3.26.
  59. Faria, D., Madeira, S., Buciumeanu, M., Silva, F.S., Carvalho, O., "Novel laser textured surface designs for improved zirconia implants performance". Materials Science and Engineering C, Vol. 108, art. no. 110390, 2020. IF=6.259.
  60. R. O. Rodrigues, P. C. Sousa, J. Gaspar, M.Bañobre‐López, R. Lima, G. Minas, "Organ-on-a-Chip: A Preclinical Microfluidic Platform for the Progress of Nanomedicine". Small Vol. 16, Issue 51, 2020, 2003517, 2020. IF=11.321.
  61. Leal, A., Andrade, R., Hinckel, B., Tompkins, M., Bastos, R., Flores, P., "Patients with different patellofemoral disorders display a distinct ligament stiffness pattern under instrumented stress testing". Journal of ISAKOS, Vol. 5, pp. 74-79, 2020. IF=n/a.
  62. R. Marques-Almeida, V. F. Cardoso, F. M. Gama, S. Lanceros-Mendez, C. Ribeiro, "Patterned piezoelectric scaffolds for osteogenic differentiation". International Journal of Molecular Sciences, 2020. IF=4.602.
  63. J.C.M. Souza, M.S.T. Correia, M. Noronha Oliveira, F. Silva, B. Henriques, et al., "PEEK-matrix composites containing different content of natural silica fibers or particulate lithium‑zirconium silicate glass fillers: Coefficient of friction and wear volume measurements". Biotribology 24:100147, 2020. IF=2.419.
  64. J.P.B. Silva, E.M.F.Vieira, J. M. B. Silva, K. Gwozdz, F. G. Figueiras, M. Pereira, "Perovskite ferroelectric thin film as an efficient interface to enhance the photovoltaic characteristics of Si/SnOx heterojunctions". Journal of Materials Chemistry A, Vol. 8, pp. 11314–11326, 2020. IF=11.545.
  65. N. Castro, S. Ribeiro, M. M Fernandes, C. Ribeiro, V. Cardoso, et al., "Physically Active Bioreactors for Tissue Engineering Applications". Advanced biosystems, 2020. IF=3.536.
  66. Pereira, H., Cengiz, I.F., Maia, F.R., Bartolomeu, F., Oliveira, J.M. , et al., "Physicochemical properties and cytocompatibility assessment of non-degradable scaffolds for bone tissue engineering applications". Journal of the Mechanical Behavior of Biomedical Materials, Vol. 112, art. no. 103997, 2020. IF=3.737.
  67. SO Catarino, P Félix, P Sousa, V Pinto, G Minas, "Portable device for optical quantification of hemozoin in diluted blood samples". IEEE Transactions on Biomedical Engineering, 2020. IF=5.496.
  68. Aida B. Moreira, Laura M. M. Ribeiro, Pedro Lacerda, Ricardo O. Sousa, Ana M. P. Pinto, Manuel F. Vieira, "Preparation and Microstructural Characterization of a High-Cr White Cast Iron Reinforced with WC Particles". Materials 2020, 13, 2596, 2020. IF=3.26.
  69. Cunha, A., Ferreira, R., Trindade, B., Silva, F.S., Carvalho, O., "Production of a laser textured 316L stainless steel reinforced with CuCoBe + diamond composites by hot pressing: Influence of diamond particle size on the hardness and tribological behaviour". Tribology International, Vol. 146, art. no. 106056, 2020. IF=4.968.
  70. Pereira, H., Carvalho, O., Miranda, G., Silva, F.S., "Pure magnesium laser surface modification using Nd:YAG laser". Materials Technology, 2020. IF=1.845.
  71. Melo-Fonseca, F., Miranda, G., Domingues, H.S., Pinto, I.M., Gasik, M., Silva, F.S., "Reengineering Bone-Implant Interfaces for Improved Mechanotransduction and Clinical Outcomes". Stem Cell Reviews and Reports, Vol. 16, pp. 1121-1138, 2020. IF=5.353.
  72. Cunha A., Ferreira R., Trindade B., Silva F.S., Carvalho O., "Reinforcement of a laser-textured 316L steel with CuCoBe-diamond composites through laser sintering". Materials and Manufacturing Processes, Vol. 35, pp. 1032-1039, 2020. IF=3.773 .
  73. V. Fernandes, S. Ferreira, A. Ferraz, O. Carvalho, F. Silva, P. Miller, "Root intracanal posts on rehabilitation of endodontic treated teeth. A narrative review". RevSalus, 2020. IF=n/a.
  74. Pereira, H.F., Cengiz, I.F., Silva, F.S., Reis, R.L., Oliveira, J.M., "Scaffolds and coatings for bone regeneration". Journal of Materials Science: Materials in Medicine, Vol. 31, art. no. 27, 2020. IF=2.56.
  75. Zakariae Jebroni, José A. Afonso, Belkassem Tidhaf, "Smart Home Energy Management System based on a Hybrid Wireless Network Architecture". EAI Endorsed Transactions on Energy Web, 2020. IF=0.598.
  76. S. M. Cerqueira, Alexande F. Silva , C. P. Santos, "Smart Vest for Real-Time Postural Biofeedback and Ergonomic Risk Assessment". IEEE Access, Vol. 8, pp. 107583 - 107592, 2020. IF=4.983.
  77. M. G. Ferreira , M. Santos , F. Rosa, C. A. Sousa, J. Santos, N. Dourado , "Spare roof technique: A new technique for hump removal-the step-by-step guide". Plastic and Reconstructive Surgery, pp. 403-406, 2020. IF=3.207.
  78. A. S. Macedo, E. O. Carvalho, V. F. Cardoso, D. M. Correia, D. M. Correia, et al., "Tailoring electroactive poly(vinylidene fluoride‐co-trifluoroethylene) microspheres by a nanoprecipitation method". Materials Letters. 127018, 2020. IF=3.371.
  79. E. S. Pimentel, R. Brito-Pereira, T. Marques-Almeida, C. Ribeiro, V. F. Cardoso, et al., "Tailoring Electrospun Poly(l-lactic acid) Nanofibers as Substrates for Microfluidic Application". ACS Applied Materials and Interfaces. 12 (1), p. 60-69, 2020. IF=9.002.
  80. A. Fertuzinhos, M. A. Teixeira, M. G. Ferreira, P. Flores, A. Zille, N. Dourado, "Thermo‐Mechanical Behaviour of Human Nasal Cartilage". Polymers, Vol. 12: 177, 2020. IF=3.619.
  81. M. J. Maciel, N. M. Gomes, S. Pimenta, J. F. Ribeiro, J. H. Correia, "TiO2/airgap-based polarizing beam splitter: design, simulation, and fabrication based on MEMS technologies". Optics and Lasers in Engineering: Elsevier, Vol. 133, October 2020, 106110, 2020. IF=4.962.
  82. A.I. Costa, L. Sousa, A.C. Alves, F. Toptan, "Tribocorrosion behaviour of bio-functionalized porous Ti surfaces obtained by two-step anodic treatment". Corrosion Science, Vol. 166, pp. 108467, 2020. IF=6.884.
  83. Amanda Carvalho, Paulo Pinto, Sara Miranda, Filipe S. Silva, Oscar Carvalho, José R. Gomes, "Tribological characterization of dental restorative materials". Biotribology Vol. 23 (2020) 100140, 2020. IF=2.419.
  84. Ferreira, R., Martins, J., Carvalho, Ó., Sobral, L., Carvalho, S., Silva, F., "Tribological solutions for engine piston ring surfaces: an overview on the materials and manufacturing". Materials and Manufacturing Processes, Vol. 35, pp. 498-520, 2020. IF=3.773.
  85. Leal, A., Andrade, R., Flores, P., Silva, F.S., Fulkerson, J., et al., "Unilateral anterior knee pain is associated with increased patellar lateral position after stressed lateral translation". Knee Surgery, Sports Traumatology, Arthroscopy, Vol. 28, pp. 454-462, 2020. IF=3.518.
  86. A. J. Paleo, E.M. F. Vieira, K. Wan, O. Bondarchuk, M. F. Cerqueira, A. M. Rocha, "Vapor grown carbon nanofiber based cotton fabrics with negative thermoelectric power". Cellulose, Vol. 27 , pp. 9091–9104, 2020. IF=4.386.
  87. J.C.M. Souza, C. Silva, J. Caramês, B. Henriques, A. P. Novaes Oliveira, F. Silva, "Wear behavior of dental glass-ceramics: a scoping review on the damage of opposing tooth enamel surfaces". Biotribology, Vol. 21, art. no. 100116, 2020. IF=2.419.
  88. C. Pinheiro, J. Figueiredo, N. Magalhães, C. P. Santos, "Wearable Biofeedback Improves Human-Robot Compliance during Ankle-Foot Exoskeleton-Assisted Gait Training: A Pre-Post Controlled Study in Healthy Participants". Sensors, Vol.20(20), 5876, 2020. IF=4.019.
  89. Joana Figueiredo, Simão P. Carvalho, João Paulo Vilas-Boas, Luís M. Gonçalves, Juan C. Moreno, Cristina P. Santos, "Wearable inertial sensor system towards daily human kinematic gait analysis: Benchmarking analysis to MVN BIOMECH". Sensors, Vol.20(8), 2185,pp. 1-24, 2020. IF=4.019.
  90. José A. Afonso, Hélder G. Duarte, Luiz A. Lisboa Cardoso, Vítor Monteiro, João L. Afonso, "Wireless Communication and Management System for E-Bike Dynamic Inductive Power Transfer Lanes". Electronics, Vol. 9, No. 9, 2020. IF=2.845.
  91. Khalfallah, A., Oliveira, M.C., Alves, J.L., Menezes, L.F., "Constitutive parameter identification of CB2001 yield function and its experimental verification using tube hydroforming tests". International Journal of Mechanical Sciences, 2020. IF=5.283.
  92. Neto, D.M., Simões, V.M., Oliveira, M.C., Alves, J.L., Laurent, H., et al., "Experimental and numerical analysis of the heat generated by plastic deformation in quasi-static uniaxial tensile tests". Mechanics of Materials, 2020. IF=3.118.
  93. Fraga, L.G., Silva, J., Teixeira, S., Soares, D., Ferreira, M., Teixeira, J., "Influence of operating conditions on the thermal behavior and kinetics of pine wood particles using thermogravimetric analysis". Energies, 2020. IF=3.288.
  94. Gomes, I.V., Puga, H., Alves, J.L., "Influence of the Adopted Balloon Modeling Strategies in the Stent Deployment Procedure: An In-Silico Analysis". Cardiovascular Engineering and Technology, 2020. IF=2.052.
  95. Emadinia, O., Guedes, A., Tavares, C.J., Simões, S., "Joining alumina to titanium alloys using ag-cu sputter-coated ti brazing filler". Materials, 2020. IF=3.26.
  96. Castro, A.P.G., Alves, J.L., "Numerical implementation of an osmo-poro-visco-hyperelastic finite element solver: application to the intervertebral disc". Computer Methods in Biomechanics and Biomedical Engineering, 2020. IF=1.194.
  97. Soares, D., Sarmento, M., Barros, D., Peixoto, H., Figueiredo, H., et al., "The effect of Bi addition on the electrical and microstructural properties of SAC405 soldered structure". Soldering and Surface Mount Technology, 2020. IF=2.582.

2019

  1. SO Catarino, G Minas, R Lima, " Editorial for the Special Issue on Micro/Nano Devices for Blood Analysis". Micromachines, 2019, 10(10), 708, 2019. IF=2.426.
  2. A. Santos, L. Amorim, J.P. Nunes, L.A. Rocha, A.F. Silva, J.C. Viana, "A comparative study between knocked down aligned carbon nanotubes and Buckypaper-based strain sensors". Materials, vol. 12, no. 12, p. 2013, 2019. IF=2.972.
  3. F. Isaac, F. Marques, N. Dourado, P. Flores , "A finite element model of a 3D dry revolute joint incorporated in a multibody dynamic analysis". Multibody System Dynamic, Vol. 45(3), pp. 293-313, 2019. IF=2.364.
  4. V. C. Pinto, C. F. Araújo, P. J. Sousa, L. M. Gonçalves, G. Minas, "A low-cost lab-on-a-chip device for marine pH quantification by colorimetry.". Sensors and Actuators B: Chemical (2019)., 2019. IF=5.667.
  5. Vera Faustino, Raquel O Rodrigues, Diana Pinho, Elísio Costa, Alice Santos-Silva, et al., "A microfluidic deformability assessment of pathological red blood cells flowing in a hyperbolic converging microchannel". Micromachines 2019, 10(10), 645, 2019. IF=2.426.
  6. A.E. Costa, A.F. Silva, O.S. Carneiro, "A Study on Extruded Filament Bonding in Fused Filament Fabrication". Rapid Prototyp. J., vol 25, no. 3, pp. 555–565, 2019. IF=2.801.
  7. G. Miranda, S. Faria, F. Bartolomeu, N. Alves, M. Gasik , F.S. Silva, "A study on the production of thin-walled Ti6Al4V parts by selective laser melting". Journal of Manufacturing Processes, Vol. 39, pp. 346-355, 2019. IF=2.809.
  8. S. Pereira, A. Pinto, J. Amorim, A. Ribeiro, V. Alves, C. A. Silva, "Adaptive feature recombination and recalibration for semantic segmentation with Fully Convolutional Networks". IEEE Transactions on Medical Imaging, , vol. 38, no. 12, pp. 2914-2925, 2019. IF=7.816.
  9. Abolfazl Azarniya , Flavio Bartolomeu, Georgina Miranda, Filipe Samuel Silva, Seeram Ramakrishna, Amir A. Zadpoor, "Additive manufacturing of Ti–6Al–4V parts through laser metal deposition (LMD): Process, microstructure, and mechanical properties". Journal of Alloys and Compounds, 2019. IF=3.779.
  10. M. Escobar, B. Henriques, M. C. Fredel, F. S. Silva, M. Özcan, J. C. M. Souza, "Adhesion of PEEK to resin-matrix composites used in dentistry: a short review on surface modification and bond strength". Journal of Adhesion Science and Technology, 2019. IF=1.210.
  11. A. Santos, L. Amorim, J.P. Nunes, L.A. Rocha, A.F. Silva, J.C. Viana, "Aligned Carbon Nanotube Based Sensors for Strain Sensing Applications". Sensors and Actuators A: Physical, no. 289, pp. 157–164, 2019. IF=2.739.
  12. C. Frazão, B. Díaz, J. Barros, J. A. Bogas, F. Toptan, "An experimental study on the corrosion susceptibility of recycled steel fiber reinforced concrete". Cement and Concrete Composites, Vol. 96, pp. 138-153., 2019. IF=4.660.
  13. P. M. Vieira, C. P. Silva, D. Costa, I. F. Vaz, C. Rolanda, C. S. Lima, "Automatic Segmentation and Detection of Small Bowel Angioectasias in WCE Images". Annals of Biomedical Engineering, Vol 47, pp. 1446-1462, 2019. IF=3.474.
  14. Susana O. Catarino, Raquel O Rodrigues, Diana Pinho, João M. Miranda, Graça Minas, Rui Lima, "Blood Cells Separation and Sorting Techniques of Passive Microfluidic Devices: From Fabrication to Application". Micromachines 2019, 10(9), 593, 2019. IF=2.426.
  15. JP Mendes, JMSS Esperança, MJ Medeiros, JF Ribeiro, MM Silva, S Olivero, "Catalytic Cyclization of Propargyl Bromoethers via Electrogenerated Nickel(I) Tetramethylcyclam in Ionic Liquids and Ionic Liquids/Water Mixtures in Ionic Liquids: Water Effects". J Electrochem Soc, ECS, vol. 166, pp. G17-G24, 2019. IF=3.662.
  16. F. Toptan, A.C. Alves, F. Bartolomeu, A. M. P. Pinto, F. S. Silva, G. Miranda, "Corrosion and tribocorrosion behaviour of Ti6Al4V produced by selective laser melting and hot pressing in comparison with the commercial alloy". Journal of Materials Processing Technology, Vol. 266, pp. 239-245, 2019. IF=3.647.
  17. I. Çaha, A.C Alves, P.N. Lisboa-Filho, J.H.D. Silva, L.A. Rocha, et al., "Corrosion and tribocorrosion behaviour of titanium nitride thin films grown on titanium under different deposition times". Surface & Coatings Technology, 34, pp. 878-888, 2019. IF=3.192.
  18. M.M. COSTA, T.A. DANTAS, F. BARTOLOMEU, N. ALVES, F.S. SILVA, G. MIRANDA, "Corrosion behaviour of PEEK or β-TCP-impregnated Ti6Al4V SLM structures targeting biomedical applications". Transactions of Nonferrous Metals Society of China Vol. 29, pp 2523-2533, 2019. IF=2.338.
  19. S. Madeira, M. Gasik, Júlio C.M. Souza, F.S. Silva, Bruno Henriques, "Damping and mechanical behavior of metal-ceramic composites applied to novel dental restorative systems". Journal of the Mechanical Behavior of Biomedical Materials, Vol. 90, pp. 239-247, 2019. IF=3.239.
  20. C. Goncalves, A.F. Silva, R.J. Simoes, L. Stirling, B. Holschuh, "Design and Characterization of an Active Compression Garment for the Upper Extremity". IEEE/ASME Transactions on Mechatronics, vol. 24, no. 4, pp. 1464–1472, 2019. IF=4.943.
  21. T. Matos, C. L. Faria, M. S. Martins, R. Henriques, PA Gomes, L.M. Gonçalves, "Development of a Cost-Effective Optical Sensor for Continuous Monitoring of Turbidity and Suspended Particulate Matter in Marine Environment". Sensors, 2019. IF=3.031.
  22. N. F. Ribeiro, J. André, L. Costa, C. P. Santos, "Development of a Strategy to Predict and Detect Falls Using Wearable Sensors". Journal of Medical Systems: Springer, Vol. 43, pp. 134-148, 2019. IF=2.1.
  23. D. Faria, J.M. Pires, A.R. Boccaccini, O. Carvalho, F.S. Silva, J. Mesquita-Guimarães, "Development of novel zirconia implant's materials gradated design with improved bioactive surface". Journal of the Mechanical Behavior of Biomedical Materials, Vol. 94, pp. 110-125, 2019. IF=3.239.
  24. C. Chirico, S. Tsipas, F. Toptan, E. Gordo, "Development of Ti-Nb and Ti-Nb-Fe Beta Alloys from TiH2 Powders". Powder Metallurgy, Vol. 62, pp. 44-53., 2019. IF=0.893.
  25. M.M. Costa, F. Bartolomeu, A. Miranda, F.S. Silva, N.A. Silva, G. Miranda, "Development of β-TCP-Ti6Al4V structures: Driving cellular response by modulating physical and chemical properties". Materials Science and Engineering: C, Vol. 98, pp. 705-716, 2019. IF=5.080.
  26. M.S. Gomes, S. Cruz, H. Lopes, B. Arcipreste, R. Magalhaes, A.F. Silva, "Distributed Optical Fiber Sensors for PCB-Strain Analysis". IEEE Transactions on Industrial Electronics, vol. 66, no. 10, pp. 8181–8188, 2019. IF=7.503.
  27. N. Dourado, M.F.S.F. de Moura, "Effect of temperature on the fracture toughness of wood under mode I quasi-static loading". Construction and Building Materials, 2019. IF=4.046.
  28. A. Colim, P. Arezes, P. Flores, A.C. Braga, "Effects of workers' Body Mass Index and task conditions on exertion psychophysics during Vertical Handling Tasks". Work, Vol. 63(2), pp. 231-241, 2019. IF=1.07.
  29. Inês M.R. Gonçalves, Oscar Carvalho, Bruno Henriques, Filipe S. Silva, Wim Teughels, Júlio C.M. Souza, "Electrical potential approaches to inhibit biofilm adhesion on titanium implants". Materials Letters, Vol 255, 126577, 2019. IF=3.019.
  30. R. Gonçalves, T. Marques-Almeida, D. Miranda, V. F. Cardoso, C. M. Costa, S. Lanceros-Méndez, "Enhanced performance of fluorinated separator membranes for lithium ion batteries through surface micropatterning". Energy Storage Materials. Vol. 21, pp. 124-135 , 2019. IF=15.09.
  31. E.M. F. Vieira, J. Figueira, A.L.Pires, M. F. Silva, A.M.Pereira, L.M.Goncalves, "Enhanced thermoelectric properties of Sb2Te3 and Bi2Te3 films for flexible thermal sensors". Journal of Alloys and Compounds, Vol. 774, pp. 1102-1116, 2019. IF=3.779.
  32. F.A.M. Pereira, M.F.S.F. de Moura, N. Dourado , "Enhancement of stiffness and load bearing capacity of damaged mortar beams with CFRP patches". Composite Structures, Vol. 210, pp. 518-525, 2019. IF=4.829.
  33. J. Mesquita-Guimarães, L. Ramos, R. Detsch, B. Henriques, M.C. Fredel, F.S. Silva, "Evaluation of in vitro properties of 3D micro-macro porous zirconia scaffolds coated with 58S bioactive glass using MG-63 osteoblast-like cells". Journal of the European Ceramic Society, Vol. 39, pp. 2545-2558, 2019. IF=3.794.
  34. C. A. M. Volpato, Ó. Carvalho, M. R. da Cunha Pereira, F.S. Silva, "Evaluation of the color and translucency of glass-infiltrated zirconia based on the concept of functionally graded materials". The Journal of Prosthetic Dentistry, Vol. 121, pp. 547.e1-547.e7, 2019. IF=2.347.
  35. N. Dourado, F.A.M. Pereira, J. L. Lousada, M.F.S.F. de Moura , "Experimental and numerical analyses of wood boards joining using wood-pin connectors". Construction and Building Materials, 2019. IF=4.046.
  36. B. C.Costa, A. C. Alves , F. Toptan, A. M. P. Pinto, L. Grenho, M.H. Fernandes, "Exposure effects of endotoxin-free titanium-based wear particles to human osteoblasts". Journal of the Mechanical Behavior of Biomedical Materials 95 (2019) 143–152, 2019. IF=3.239.
  37. N. Dourado, M.F.S.F. de Moura, A. Jesus , "Fatigue-fracture characterization of wood under mode I loading". International Journal of Fatigue, pp. 121: 265-271, 2019. IF=3.673.
  38. A. Rubio, V. Faustino, M.G. Cabezas, R. Lima, E.J. Vega, "Fire-shaped cylindrical glass micronozzles to measure cell deformability". Journal of Micromechanics and Microengineering, Volume 29, Number 10, 2019. IF=2.141.
  39. Mariana Brito da Cruz, Mafalda Costa, Georgina Miranda, Filipe Samuel Silva, A. D. S. Pereira da Mata, J. M. M. Caramês, "Hard and Soft Tissue Cell Behavior on Polyetheretherketone, Zirconia, and Titanium Implant Materials". International Journal of Oral and Maxillofacial Implants, Vol. 34(1), pp. 39-46, 2019. IF=1.699.
  40. Ana Leal, Renato Andrade, Paulo Flores, Filipe Samuel Silva, João Espregueira-Mendes, Elizabeth Arendt, "High heterogeneity in in vivo instrumented-assisted patellofemoral joint stress testing: a systematic review". Knee Surgery, Sports Traumatology, Arthroscopy, Vol. 27, pp. 745–757, 2019. IF=3.210.
  41. E.M. F. Vieira, A.Pires, J. Silva, V. Magalhaes, J. Grilo, L.M.Goncalves, "High Performance µ- Thermoelectric Device based on Bi2Te3/Sb2Te3 p-n Junctions". ACS Applied Materials & Interfaces, 2019. IF=8.456.
  42. E.M. F. Vieira, J.Silva, K. Veltruska, V. Matolin, A.Pires, L.M.Goncalves, "Highly sensitive thermoelectric touch sensor based on p-type SnOx thin film". Nanotechnology, 2019. IF=3.399.
  43. F. Bartolomeu, M.M. Costa, J.R. Gomes, C.S. Abreu, F.S. Silva, G. Miranda, "Implant surface design for improved implant stability – A study on Ti6Al4V dense and cellular structures produced by Selective Laser Melting". Tribology International, Vol. 129, pp. 272-282, 2019. IF=3.276.
  44. A. C. Alves , R. Thibeaux , F. Toptan, A. M. P. Pinto, P. Ponthiaux, B. David, "Influence of macroporosity on NIH/3T3 adhesion, proliferation, and osteogenic differentiation of MC3T3-E1 over bio-functionalized highly porous titanium implant material". Journal of Biomedical Materials Research: Part B - Applied Biomaterials, Vol. 107B, pp. 73–85., 2019. IF=3.373.
  45. Figueira, D., Sena-Cruz, J., Pereira, E., Valente, I., Barros, J., Castro, F., "Influence of service temperature on shear creep behaviour of a rigid low-density closed-cell PIR foam'". Construction and Building Materials, 2019. IF=4.046.
  46. S. Madeira, M. Buciumeanu, O. Carvalho, F.S. Silva, "Influence of sintering pressure on the microstructure and tribological properties of low temperature fast sintered hot-pressed Y-TZP". Ceramics International, Vol. 45, pp. 5883-5893, 2019. IF=3.057.
  47. M.A. Ribeiro, O.S. Carneiro, A.F. Silva, "Interface Geometries in 3D Multi-Material Prints by Fused Filament Fabrication". Rapid Prototyp. J., vol. 25, no. 1, pp. 38–46, 2019. IF=2.801.
  48. José P. Martins, João C. Ferreira, Vítor Monteiro, José A. Afonso, João L. Afonso, "IoT and Blockchain Paradigms for EV Charging System". Energies, Vol. 12, No. 15, 2019. IF=2.707.
  49. Simões, S., Soares, A., Tavares, C.J., Guedes, A., "Joining of TiAl alloy using novel Ag-Cu sputtered coated Ti brazing filler'". Microscopy and Microanalysis, 2019.
  50. B. Guimarães, D. Figueiredo, C.M. Fernandes, F.S. Silva, G. Miranda, O. Carvalho, "Laser machining of WC-Co green compacts for cutting tools manufacturing". International Journal of Refractory Metals and Hard Materials, Vol. 81, pp. 316-324, 2019. IF=2.606.
  51. C.G. Moura, O. Carvalho, L.M.V. Gonçalves, M.F. Cerqueira, R. Nascimento, F. Silva, "Laser surface texturing of Ti-6Al-4V by nanosecond laser: Surface characterization, Ti-oxide layer analysis and its electrical insulation performance". Materials Science and Engineering: C, Vol. 104, 109901, 2019. IF=4.959.
  52. M.Bunea, A.Cîrciumaru, M.Buciumeanu, I.G.Bîrsan, F.S.Silva, "Low velocity impact response of fabric reinforced hybrid composites with stratified filled epoxy matrix". Composites Science and Technology, Vol. 169, pp. 242-248, 2019. IF=5.160.
  53. Douglas Fabris, J. Mesquita-Guimarães, Paulo Pinto, Júlio C.M. Souza, Márcio C. Fredel, Filipe S. Silva, "Mechanical properties of zirconia periodic open cellular structures". Ceramics International, online 9 May 2019, 2019. IF=3.057.
  54. J. C. M. Souza, T. S. M. Correia, B. Henriques, A. P. Novaes de Oliveira , F. S. Silva, J. R. Gomes, "Micro-scale abrasion wear of novel biomedical PEEK-matrix composites for restorative dentistry". Surface Topography: Metrology and Properties, Vol. 7, Issue 1, pp. , 2019. IF=2.439.
  55. F. Marques, P. Flores, J.C.P. Claro, H.M. Lankarani, "Modeling and analysis of friction including rolling effects in multibody dynamics: a review". Multibody System Dynamics, Vol. 45(2), pp. 223-244, 2019. IF=2.364.
  56. A.P.G. Castro, A. Completo, J.A. Simoes, P. Flores, "Modelling and simulation of alternative designs for the femur–implant interface of Journey patellofemoral prosthesis". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Vol. 233(8), pp. 1619-1628, 2019. IF=1.568.
  57. B. JMAI, H. Dinis, P. Anacleto, A. Rajhi, P. M. Mendes, A. Gharsallah, "Modelling, Design, and Fabrication of a Novel Reconfigurable Ultra Wide Band Impedance Matching Based on RF MEMS Technology". IET Circuits Devices & Systems, 2019. IF=1.277.
  58. F. Bartolomeu, M. Buciumeanu, M.M. Costa, M. Gasik , F.S. Silva, G. Miranda, "Multi-material Ti6Al4V & PEEK cellular structures produced by Selective Laser Melting and Hot Pressing: A tribocorrosion study targeting orthopedic applications". Journal of the Mechanical Behavior of Biomedical Materials, Vol. 89, pp. 54-64, 2019. IF=3.239.
  59. Julio C.M. Souza, Mariane B. Sordi, Miya Kanazawa, Sriram Ravindran, Bruno Henriques, Filipe S. Silva; et al., "Nano-scale modification of titanium implant surfaces to enhance osseointegration". Acta Biomaterialia, Vol. 94, pp 112-131, 2019. IF=6.638.
  60. A.J. Paleo, E.M.F.Vieira, K. Wan, O. Bondarchuk, M.F. Cerqueira, L.M.Goncalves, "Negative Thermoelectric power of melt mixed vapor grown carbon nanofiber polypropylene composites". Carbon, 2019. IF=7.082.
  61. Ana Marques, Georgina Miranda, Diana Faria, Paulo Pinto, Filipe Silva, Oscar Carvalho, "Novel design of low modulus high strength zirconia scaffolds for biomedical applications". Journal of the Mechanical Behavior of Biomedical Materials, 2019. IF=3.239.
  62. Laura Tiainen, Pedro Abreu, Mihaela Buciumeanu, Filipe Silva, Michael Gasik, et al., "Novel laser surface texturing for improved primary stability of titanium implants". Journal of the Mechanical Behavior of Biomedical Materials, Vol. 98, pp 26-39, 2019. IF=3.485.
  63. Neto, D.M., Oliveira, M.C., Alves, J.L., Menezes, L.F., "Numerical study on the formability of metallic bipolar plates for proton exchange membrane (PEM) fuel cells'". Metals, 2019.
  64. F. Marques, H. Magalhaes, B. Liu, J. Pombo, P. Flores, J. Ambrósio, "On the generation of enhanced lookup tables for wheel-rail contact models". Wear, Vol. 434-435, 202993, 2019. IF=2.950.
  65. Barros, P.D., Oliveira, M.C., Alves, J.L., Menezes, L.F., "On the impact of modelling tension-compression asymmetry on earing and thickness predictions'". Advances in Materials and Processing Technologies, 2019.
  66. J. Figueiredo, J.C. Moreno, A. C. Matias, F. Pereira, C. P. Santos, "Outcome measures and motion capture systems for assessing lower limb orthosis-based interventions after stroke: a systematic review". Disability and Rehabilitation: Assistive Technology, 2019. IF=1.71.
  67. A. C. Costa, S. Pimenta, J. F. Ribeiro, M. F. Silva, R. F. Wolffenbuttel, J. H. Correia, "PDMS Microlenses for Focusing Light in Narrow Band Imaging Diagnostics". Sensors: MDPI, Vol. 19, pp. 1-11 , 2019. IF=2.475.
  68. J. A. Rodrigues, R. Amorim, M. F. Silva, F. Baltazar, R. F. Wolffenbuttel, J. H. Correia, "Photodynamic Therapy at Low-Light Fluence Rate: in vitro Assays on Colon Cancer Cells". IEEE Journal of Selected Topics in Quantum Electronics, Vol. 25, pp. 1-6, 2019. IF=3.367.
  69. A. P. M. Tavares, G. Minas, M. Goreti F. Sales , "Photovoltaics, plasmonics, plastic antibodies and electrochromism combined for a novel generation of self-powered and self-signalled electrochemical biomimetic sensors". Biosensors and Bioelectronics , 2019. IF=8.173.
  70. Shradha Rao, Sarah Hashemi Astaneh, Jose Villanueva, Filipe Silva, Christos Takoudis, Divya Bijukumar, "Physicochemical and in-vitro biological analysis of bio-functionalized titanium samples in a protein-rich medium". Journal of the Mechanical Behavior of Biomedical Materials, Vol. 96, pp. 152-164, 2019. IF=3.239.
  71. F. Bartolomeu, J. Fonseca, N. Peixinho, N. Alves, M. Gasik, F.S. Silva; G. Miranda, "Predicting the output dimensions, porosity and elastic modulus of additive manufactured biomaterial structures targeting orthopedic implants". Materials Science and Engineering: C, Vol. 99, pp 104-117, 2019. IF=4.959.
  72. Stephanie Roedel, Joana Mesquita-Guimarães, Júlio C.M. Souza, Filipe S. Silva, Márcio C. Fredel, Bruno Henriques, "Production and characterization of zirconia structures with a porous surface ". Materials Science and Engineering: C Vol. 101, pp. 264-273, 2019. IF=5.080.
  73. J. Garcia, A.R. Ferreira, F.S. Silva, O. Carvalho, B. Trindade, "Production and tribological characterization of a textured diamond-reinforced copper-beryllium alloy". Tribology International, Vol 140, 105843, 2019. IF=3.517.
  74. A. Cunha, R. Ferreira, B. Trindade, F. S. Silva, O. Carvalho, "Production of a laser textured 316L stainless steel reinforced with CuCoBe + diamond composites by hot pressing: Influence of diamond particle size on the hardness and tribological behaviour". Tribology International , 2019. IF=3.517.
  75. F. Barbosa, José Teixeira, S. Teixeira, R. Lima, D. Soares, D. Pinho, "Rheology of F620 solder paste and flux". Soldering & Surface Mount Technology, 2019; Vol 31(2); Pages 125-132, 2019. IF=1,258.
  76. Bruno Henriques, Douglas Fabris, Eduardo Tuyama, Joana Mesquita-Guimarães, Filipe S. Silva, Júlio C. M. Souza, "Shear bond strength of PEEK and PEEK-30GF cemented to zirconia or titanium substrates,". Journal of Adhesion Science and Technology, Vol. 33:10, pp. 1090-1101, 2019. IF=1.039.
  77. T. A. Dantas , S. Roedel , J. Mesquita‐Guimarães , P. Pinto , M.C. Fredel , F.S. Silva , "Sliding behavior of zirconia porous implant surfaces against bone". Journal of Biomedical Materials Research Part B, Vol.107, pp. 1113-1121, 2019. IF=3.239.
  78. Gabriella Peñarrieta‐Juanito, Mariane B. Sordi, Bruno Henriques, Marta E. R. Dotto, Wim Teughels, Filipe S. Silva, "Surface damage of dental implant systems and ions release after exposure to fluoride and hydrogen peroxide". Journal of Periodontal Research, Vol. 54, pp. 46-52, 2019. IF=2.878.
  79. G. Miranda, F. Sousa, M.M. Costa, F. Bartolomeu, F.S. Silva, O. Carvalho, "Surface design using laser technology for Ti6Al4V-hydroxyapatite implants". Optics & Laser Technology, Vol. 109, pp. 488-495 , 2019. IF=2.503.
  80. P. Flores, "The journal of Mechanism and Machine Theory: Celebrating 55 years since its foundation". Mechanism and Machine Theory, Vol. 142, 103599, 2019. IF=3.535.
  81. T. H. Silva, J. Mesquita-Guimarães, B. Henriques, F. S. Silva, M. C. Fredel, "The potential use of oyster shell waste in new value-added by-product". Resources, Vol. 8, Issue 1, article number 3, pp. 1-15, 2019. IF=2.60.
  82. Neto, D.M., Pais, M., Oliveira, M.C., Alves, J.L., Menezes, L.F., "Thermomechanical analysis of the draw bead test'". Advances in Materials and Processing Technologies, 2019.
  83. F.Bartolomeu, C.S.Abreu, C.G.Moura, M.M.Costa, F.S. Silva, G. Miranda, "Ti6Al4V-PEEK multi-material structures – design, fabrication and tribological characterization focused on orthopedic implants". Tribology International, Vol. 131, pp. 672-678, 2019. IF=3.276.
  84. S. Pimenta, S. Cardoso, E. M. S. Castanheira, G. Minas, "Towards an on-chip optical microsystem for spectroscopic detection of gastrointestinal dysplasia". Sensors & Actuators: B. Chemical, Vol. 281, pp. 751-756 , 2019. IF=5.667.
  85. M.M. Costa, F. Bartolomeu, N. Alves, F.S. Silva, G. Miranda, "Tribological behavior of bioactive multi-material structures targeting orthopedic applications". Journal of the Mechanical Behavior of Biomedical Materials, Vol. 94, pp. 193-200, 2019. IF=3.239.
  86. Rita Ferreira, Jorge Martins, Óscar Carvalho, Luis Sobral, Sandra Carvalho, Filipe Silva, "Tribological solutions for engine piston ring surfaces: an overview on the materials and manufacturing". Materials and Manufacturing Processes , 2019. IF=3.350.
  87. O. Okhay, G. Goncalves, C.Dias, J. Ventura, E.M. F. Vieira, L.M.Goncalves, "Tuning electrical and thermoelectric properties of freestanding graphene oxide papers by carbon nanotubes and heat treatment". Journal of Alloys and Compounds, Vol. 781, pp. 196 - 200, 2019. IF=3.779.
  88. T. Marques-Almeida, V.F. Cardoso, S. Ribeiro, F.M. Gama, C. Ribeiro, S. Lanceros-Mendez, "Tuning myoblast and pre-osteoblast cell adhesion site, orientation and elongation through electroactive micropatterned scaffolds". ACS Appl. Bio Mater. Vol. 2 (4), pp 1591–1602, 2019. IF=n/a.
  89. Monteiro, V., Afonso, J.A, Ferreira, J.C., Afonso, J.L., "Vehicle electrification: New challenges and opportunities for smart grids'". Energies, 2019. IF=2.707.
  90. Oliveira, A.F.F., Toptan, F., "Wear Behavior of Ti-Al2O3 Biocomposites in 9 g/L NaCl Solution'". Journal of Materials Engineering and Performance, 2019.
  91. Martins, M.S.Matos, T., Faria, C.L., Goncalves, L.M., Cabral, J., Silva, A., Jesus, S.M., "Wideband and wide beam polyvinylidene difluoride (PVDF) acoustic transducer for broadband underwater communications". Sensors, 2019. IF=3.031.
  92. S. Madeira, J. Mesquita-Guimarães, P. Ribeiro, M. Freudel, J. C. M. Souza, D. Soares, "Y-TZP/porcelain graded dental restorations design for improved damping behavior – A study on damping capacity and dynamic Young's modulus". Journal of the Mechanical Behavior of Biomedical Materials, Vol. 96, pp. 219-226, 2019. IF=3.239.
  93. Fernanda H. Schünemann, María E. Galárraga-Vinueza, Ricardo Magini, Márcio Fredel, Filipe Silva, Júlio C.M. Souza, "Zirconia surface modifications for implant dentistry". Materials Science and Engineering: C, Vol. 98, pp. 1294-1305, 2019. IF=5.080.
  94. Sousa, J.M., Alves, A.C., Toptan, F., Ariza, E., Guedes, A., "Corrosion and Tribocorrosion Behavior of Ti-B4C Composites Joined with TiCuNi Brazing Alloy'". Journal of Materials Engineering and Performance, 2019.